 |
 |
|
|
| |
The
TecSteel HS welded
steel panel, with its unique 64 dome design, has been proven
worldwide in thousands of computer, machine and control rooms.
The TecSteel HS
and FS panels are interchangeable, and are coated with a conductive
powder epoxy paint.
Features & Benefits
- Welded
Steel Panel design
- Concentrated
design loads-1000 lbs. to 2500 lbs.
- Powder
coat epoxy paint on exposed panel surfaces
- Adjustable
floor heights-4" to 6'
- Perforated
panels-25% open airflow
- Steel grating
panels with 35% or 50% open airflow
- Panel finish
options-standard antistatic high pressure laminate (HPL) standard
conductive high pressure laminate (HPL), carpet, vinyl composition
tile, bare and corner lock
- Optional
panel edge treatments
Airflow
panels for
TecSteel HS
and TecSteel FS
systems
Airflow panels are used to route cooling air from under the
floor onto critical equipment. They sit flush with the surrounding
raised floor surface, thus eliminating the potential trip hazards
often caused by the trim detail on floor registers and grills.
InterfaceAR offers perforated airflow panels
that are interchangeable with all TecSteel
FS and TecSteel
HS solid panels. Our perforated panels are rated
at 1000 PSI to 2500 PSI concentrated load and offer 25% free
air flow. Optional slide dampers are available to control air
volume at any position from closed to full open. The damper
is adjustable with a standard lot screw driver from the panel's
top surface.
We also offer steel grating panels for TecSteel
systems that deliver 35% and 50% airflow.
|
|
