 |
|
|
| |
TecSteel
FS
welded steel panel uses the same unique 64 dome design as our
HS panel.
The panel's cementitious core provides strength and sound control,
delivering excellent rolling load ratings for high traffic areas
and the high ultimate load ratings necessary for data centers.
The TecSteel
FS
and HS panels
are interchangeable, and are coated with a conductive powder
epoxy paint.
Features & Benefits
- Welded
Steel Panel design
- Concentrated
design loads-1000 lbs. to 2500 lbs.
- Powder
coat epoxy paint on exposed panel surfaces
- Adjustable
floor heights-4" to 6'
- Perforated
panels-25% open airflow
- Steel grating
panels with 35% or 50% open airflow
- Panel finish
options-standard antistatic high pressure laminate (HPL) standard
conductive high pressure laminate (HPL), carpet, vinyl composition
tile, bare and corner lock
- Optional
panel edge treatments
Airflow
panels for TecSteel
HS
and TecSteel
FS
systems
Airflow panels are used to route cooling air from under the
floor onto critical equipment. They sit flush with the surrounding
raised floor surface, thus eliminating the potential trip hazards
often caused by the trim detail on floor registers and grills.
InterfaceAR offers
perforated airflow panels that are interchangeable with all
TecSteel
FS
and TecSteel
HS
solid panels. Our perforated panels are rated at 1000 PSI to
2500 PSI concentrated load and offer 25% free air flow. Optional
slide dampers are available to control air volume at any position
from closed to full open. The damper is adjustable with a standard
lot screw driver from the panel's top surface.
We also offer steel grating panels for TecSteel
systems that deliver 35% and 50% airflow. |
|
